- DIP switches near J3 connector on Firefly generator bridge
- Should both be in “OFF” position since 180-ohm network terminator is between J3 jumper cable and wire that runs to generator data interface, as per Melvin.
- Should both be in “OFF” position since 180-ohm network terminator is between J3 jumper cable and wire that runs to generator data interface, as per Melvin.
- Fixed inability of black plastic driver’s footwell trim to be fastened down correctly.
- Airstream’s black-fabric covered metal trim piece was too wide, so I had to purchase tin snips and trim them to the right width.
- Airstream’s black-fabric covered metal trim piece was too wide, so I had to purchase tin snips and trim them to the right width.